 |
 |
Gas cleaning with the use of electrostatic precipitators is widely applied in many industrial sectors. Our plant manufactures electrostatic precipitators of various designs. The EGBM-type electrostatic precipitators are those most used to remove solids from process gases and aspiration air, emitted during different processes (drying, baking, fuel combustion, bulk material processing, etc.) in heat-power industry, ferrous and non-ferrous metallurgy, chemical industry, construction materials fabrication, etc., and to meet the maximal admissible limits of emissions from the gases to be cleaned.
EGBM-type electrostatic precipitators are used in constructing new plants, renovating the existing devices, upgrading the existing plants and as spare parts and components.
Performance data
Conventional height of electrodes (m) .......................................... 4; 6; 7,5; 9; 10,5; 12; 13,5
Electrode spacing (mm) ....................................................................................... 300; 350; 400
Number of gas paths ................................................................................................. from 8 to 88
Electric field length (m) ..................................................................... 2,56; 3,2; 3,84; 4,48; 5,12
Number of fields ..................................................................................................................... 2—6
Cleaned gas output capacity (if conventional velocity in the active section is 1m/sec,
thousand m3/hour ......................................................................................................... 50—1300
Gas temperature, °C, up to ..................................................................................................... 330
Inlet burden, g/st.m3, up to ....................................................................................................... 90
a —single-section, b — two-section
1 — body; 2 —gas-distribution grid ; 3 — collecting electrode; 4 — collecting electrode shaking device; 5 — ionizing wire; 6 — ionizing wires suspension frame; 7 — ionizing wire shaking device; 8 — collecting electrode shaking drive; 9 — ionizing wire shaking drive; 10 — current distributor; 11 — vibrator; 12 — support
Basic overall and connection dimensions (mm)
Note: The table contains data on the most common electrostatic precipitators of the EGBM standard size line. |
