EGD-type electric precipitators

Gas cleaning with the use of electrostatic precipitators is widely applied in many industrial sectors. Our plant manufactures electrostatic precipitators of various designs. EGD-type electrostatic precipitators are designed for highly-efficient ash removal from flue gases. Gas is not toxic, aggressive, inflammable or explosive. EGD-type electrostatic precipitators are used at thermal power plants in boiler sections of small dimensions. EGD-type electric precipitators are single or two-section, two-level rectangular devices, comprising three, four or five electric fields, installed in each level along the gas route.

EGD-type electrostatic precipitators are used in constructing new plants, renovating the existing devices, upgrading the existing plants and as spare parts and components.

Performance data

Conventional height of electrodes (m).................................................................... 18; 21; 24
Electrode spacing (mm)...................................................................................... 300; 350; 400
Number of gas paths................................................................................................... 60 to 152
Electric field length (m)  ....................................................................................................... 3,84
Number of fields  .................................................................................................................. 3—5
Cleaned gas output capacity (if conventional velocity in the active section is 1m/sec,
thousand m3/hour..................................................................................................... 650—2000
Gas temperature, °C, up to  ................................................................................................. 160
Inlet burden, g/st.m3, up to...................................................................................................... 20

 

1 — collecting electrode shaking device; 2 — servicing hatch; 3 — gas-distribution grid; 4 — ionizing wire; 5 — collecting electrode; 6 — ionizing wire shaking device; 7 — protective box for current supply; 8 — body

Basic overall and connection dimensions (mm)

Note: The table contains data on the most common electrostatic precipitators of the EGD standard size line.